TK200/TK700
TK200 系列和 TK700 系列电阻器
低温漂——在-40°C 至+125°C 范围内温漂5 ppm/°C、10 ppm/°C 或20 ppm/°C,以+25°C 为基准;
长期稳定性 ——通常每 2,000 小时运行优于 ±0.05%
扩展电阻范围 —— 从 1 欧姆到 10 兆欧
精度—— ±0.1% 为标准值,并提供 ±1% 和 ±0.05% 的精度
宽工作温度范围—— 从 -40°C 至 +150°C
小尺寸——带有两个微型矩形外壳,可实现最大的封装密度和最小的安装面积
高功率密度——额定功率为 0.2 瓦和 0.3 瓦(+85°C 时)的塑壳,最大的塑壳是标准 CK06 封装
无感性能——在所有类型的高频电路中提供更快的稳定时间和最小的失真
高密度封装-——TK 型电阻器的径向引线安装和小矩形外壳允许在薄型电路中实现高封装密度。由于 TK 型电阻器的四种型号具有非常广泛的电阻值范围,因此可以在更多设计中标准化引线间距和安装空间。
TK200 Series and TK700 Series Resistors
• Low Temperature Coefficient - available in 5 ppm/°C, 10 ppm/°C, or 20 ppm/°C over the entire temperature range from -40°C to +125°C, referenced to +25°C.
• Long-Term Absolute Stability - typically better than ±0.05% per 2,000 hours of operation.
• Extended Resistance Range - from 1 Kohm up to 10 Megohm.
• Precision Tolerance - ±0.1% is standard, and tolerances of ±1% and ±0.05% are available.
• Wide Operating Temperature Range - from -40°C to +150°C.
• Small Size - with two miniature rectangular cases for maximum packaging density and minimum mounting area.
• High Power Density - molded cases with power ratings of 0.2 Watt and 0.3 Watt at +85°C, the largest of the molded cases is a standard CK06 package.
• Caddock's Non-Inductive Performance - provides faster settling times and minimum distortion in all types of highfrequency circuits.
• High Density Packaging - the radial-lead mounting and small rectangular case of the Type TK resistors permit high packaging densities in low profile circuitry. Because the four models of the Type TK resistors are available in an exceptionally wide range of resistance values, lead spacing and mounting space can be standardized in a larger number of designs.
上海三下电子科技有限公司
联系我们
电话:15021595573
邮箱:sales@sansonic.com.cn
地址:上海市闵行区新龙路360弄万金中心T2-508
版权所有:上海三下电子科技有限公司 沪ICP备06045728号-1